We’re not much for celebrating Halloween in our house. We no longer have small children and my husband and I never “Trick or Treated” as kids (him because he lived in the middle of nowhere and me because I lived in a big city where the process turned VERY nasty).
We now live in a medium /large village where “Trick or Treating” is done beautifully. Parents accompany their kids, it is about sweets and treat (not money) and they never call at a house unless you have a carved Pumpkin outside your front door. Because to this I wanted to get more in the spirit this year.
I saw a tutorial on “A Beautiful Mess” a couple of weeks ago for Lollipops made to look like ghosties that was really sweet (If you haven’t had a roam around “ABM” take a look, it is my all time favourite blog, completely inspiring and very beautiful!). These spooky sweeties for Halloween were an incredibly easy to make and the children will remember getting something so special.
I decided to tweak the idea a bit for some cute things to give to our little visitors on the 31st . Using fabric felt a bit wasteful as it would be discarded by the little cherubs in thirty seconds flat and little hands would struggle with undoing knots.
Underneath are lollipops. I used tissues, half a pipe cleaner wrapped around and bent into reaching “arms” and a felt tip pen for the faces.
Can’t wait for Halloween to give them out!
I’ve been slowly chipping away at getting organised. and one of the things I am doing is putting together my own diary for next year. I have purchased a “Dodo PersonalPOD” folder that is the same size as a personal filofax.
I am in the process of working out what sections I want the planner to have but I have settled on a few planner dividers already;
- Separate sections for each month with a monthly planner in.
- More detailed pages for each month that can be put in and removed so that there are no more than three months in there in detail.
- Bright, cheerful and inspiring.
“Molly Makes” issue number 45 had some really lovely free papers in it and I had seen to pictures of American planners that had a lot of inspirational quotes in them (I’m a sucker for a prettily presented inspiring quote) and I wanted to copy that.
I decided to make my own monthly dividers with pretty backgrounds that I would find cheerful and inspiring. I found some inspirational quotes on Pinterest and printed them out onto photo paper.
I used a computer graphics programme to draw out simple divider shapes and I used a font that I liked to write in the name of the months. I then cut the papers to fit my printer and printed straight onto them.
Gluing the quotes onto the front, cutting the dividers out, laminating them and hole punching them gave me tough and cheerful dividers. The whole process took about three hours and I now have a computer file for the dividers that I can use to make dividers for other areas of the planner.
A win/win in my book 😉 Mollie Makes #46 is out now with more free papers. Time to get my thinking cap on!
When it comes to house-warming gifts I am often at a loss. I am no cook and if it is not a first home most people have the things that they really need and distinct tastes that you have to try and guess at!
Then I stumbled across a wonderful pin that showed a simple (and usually very welcome) gift idea with an amusing twist. My brain started twisting and turning and in no time I expanded the repertoire to four gift ideas in the same vein, each with their own (admittedly fairly cringe-worthy) pun.
The labels are spaced so that you can use an ordinary two hole punch to punch the holes in them (with a handy centre line to line the centre of the punch up with) and there is space to write on the back of them.
If you want to use the labels yourself for your own house-warming gifts please feel free to download them- Housewarming Labels from Il Magpie
To use the labels, simply print them and trim off the extra along each side of the label.
Then fold the strip in half and glue together.
Line each of the centre lines up with the hole punch centre line in turn and punch.
Thread ribbon or cord through and tie!
Linking up this week to I Heart Naptime’s “Link Party Palooza”.
As any crafter knows UFO stands for “Un-Finished Object”.
Well, the stag’s head (which you may remember from this post) is no longer one of them. It is finished and up! It sits above the door frame at the end of our hall so that you see it when you walk in the front door.
I’m generally pleased but I think it needs a little something else…
I don’t want to draw in eyes because I think I will muck them up and I don’t know it needs eyes?
Maybe something bright hanging from the horns? Maybe a moustache? A hat?
Time to put my thinking cap on but I’m out of inspiration just at the moment!
We are gradually trying to smarten our kitchen up a bit. We inherited all the decor from the previous owners and we always thought we would completely re-do it. However circumstances changed (not least of which was me giving up teaching) and we have never managed to get the money together. Now I am finding ways to spruce it up without major investment.
We had a set of three IKEA pictures that used to hang in our sitting room before we re-decorated. Since then they have been relegated to the upstairs sitting room. Neither or us were that enamoured of the sand dune scenes and they no longer seemed to fit anywhere (and yes, we still haven’t decided what colour to paint the walls!).
I love typography and I have long wanted to put some kind of outsize sign in the kitchen but not quite found the one that was “right”. So I made my own!
- Kitchen Foil (I used the extra wide stuff you usually use for the Christmas Turkey).
- Cardboard Boxes
- “Mod Podge” or PVA Glue
- Pritt Stick
- Double sided tape
- Mount board in the colour of your choice.
- Computer and Printer
- Cutting Mat (or smooth surface that you don’t mind getting ruined)
- Steel rule (for cutting with)
- Paintbrush or glue spreader
- Tape Measure
- Blu Tack
Decide on the word that you want to feature (mine was partially dictated by the fact I had three frames to use!) and find a font on your computer that you like.
I used “Maxxi Serif” which I found and downloaded from “Dafont.com”. If you haven’t discovered this website it is an amazing resource for what is fashionable in type right now and most of the downloads are free for personal use.
If you have Microsoft Publisher it will allow you to have sheet sizes that are larger than A4. I don’t so I have a programme called Serif Draw Plus. This is graphic design software and I have the free starter edition.
This allowed me to set up a page size the size of my frame and add type to it. I then played around with the size until I was happy. When it came to printing the programme splits the digital “page” evenly amongst certain number of A4 sheets.
Print the letters out and glue the sheets together. The printer gives a 5mm overlap to each one and I made it easier to glue them together by drawing a line at the 5mm point to align the edge of the page with more easily.
I used Pritt Stick to glue the sheets together but then sellotaped over the top of each join to help it hold together as I wanted to move on quite quickly.
I cut the letters out and used Blu-tack to put them cut outs onto the frames so that I could check the size and proportions of the letters.
I stuck the paper cut outs FACE DOWN onto some card board boxes using Mod Podge spread out with an old children’s paint brush (in my experience brushes do not survive glue!)
I stuck them face down because I wanted the templates to be on the back of the final piece and the smoother surface on the front.
Whilst waiting for the templates to dry I used the one of the pictures from the frames to mark out the size on the back of the mount board. Because of the size of the frames I had to use three pieces of mount board (a bit expensive at around £2.50 a sheet, but the only thing I bought for this project).
Because of the price of the board I drew my cutting lines in with pencil completely rather than cutting with my ruler lined up to marks!
I continued until I had my three pieces of backing board ready to go.
Using a craft knife I cut out the letters attached to the cardboard. Once I thought they were cut out completely I would flip the cardboard over and check the back (it is a good way to spot bits you have not cut all the way through on and catch them before they tear and spoil the finish)
I spread the roll of kitchen foil out along the table carefully so as not to crease it. I wanted a more industrial steel finish on my final piece so I placed it shiny side up. Again I used Mod Podge to stick the shapes to the foil and weighted them down with books to dry (around two hours).
Using a scalpel or craft knife cut the shapes from the foil leaving a border around each one. Score into internal corners at 45 degrees and cut across external ones at the same angle (see the picture if that doesn’t make sense, I wasn’t sure how to describe it!)
I then put double sided tape around the edges and folded the edges tight around the cardboard.
I used masking tape to mark onto my backing boards where I needed to line the letters up with to get them in the right position and used double sided tape to secure the letters to the back boards.
I put the boards into the frames (which I had painted white with Annie Sloan Chalk Paint and waxed) and secured.
Hang your pictures. This was actually quite tricky as they had to be level and it took me quite a long time to tweak the hanging cords to the right level!
I’m pretty pleased with result. They remind me of a slightly retro marquee sign and with three letters I have limited the amount of chaos Boffin and Best Boy can cause by re-arranging them!
This week I am linking to In a bid to get some more opinions this week I am linking to; Handmade Monday and Enjoying the Little Things.
Up until recently we had everyone’s birthdays and anniversaries displayed on a huge poster stuck to our kitchen wall. Then I succumbed and treated us to a new, outsized kitchen wall clock (well, the other one had no glass anymore!)
Suddenly there was no more room for the poster that had seen us through the last ten years. But how to replace it?
I kept trying to make my own, smaller version of the poster to fit inside a kitchen cupboard door but I could never get all the months to fit onto an A3 size and it became an Albatross (“Albatross, fresh Albatross”, anyone?!)
Then I realised whilst looking for a card for my Godson’s birthday that we may have the dates sussed but we certainly did not have the greetings card situation sorted! We had this huge box and plastic wallet files. Anyway, see below to see what I mean.
I didn’t know in advance which cards we did or did not have in stock, I could not see their designs through the folders and the whole thing was heavy and cumbersome.
What about combining the two?
You will need
- A cardboard box (I opted for one I had that was around the right size but you may find that a shoe box works well).
- Cute wrapping paper, wallpaper or fabric to cover the box with.
- More cute paper to make the dividers (I cheated and bought double sided wrapping paper so my dividers would be nice on BOTH sides!).
- Thick card board for a template.
- Self-Adhesive printable paper (or alternatively plain paper and something to stick it on with).
- A laminator and A4 laminating pouches.
- A craft knife, cutting surface and steel edge for cutting along.
- A Computer and Printer
- Tape Measure AND Ruler.
If you have a stash of cards already measure the biggest one. If you are just starting a stash buy one that is pretty much the biggest size you usually buy (mine is not that big because I resent paying huge amounts for cards!).
Use this as the template to find an appropriate box to use. You want one it will fit in width ways but that is at least half the height of the card to support it.
One sheet of wrapping paper was not enough to cover my entire box so I cut it into half along its longest side so that it would wrap around the sides and not cover the base completely (who looks underneath!)
I found that glue saturated the paper too much so I used double sided tape strips placed on the box (rather than the paper) to stick one side at a time. I worked around the outsides of the box in turn.
Fold the bottom edges under the base as if you were wrapping a present. Secure with more strips of tape near the edge of the paper. (Tip: Press down from the corner towards the edge to avoid bumps).
Using scissors cut slits in the paper at each corner, down to the edge of the box, slant them slightly so you are left with a small, roughly triangular shape at the middle of each corner. Using tape or glue stick the central pieces down first and then the sides. Again, put the tape near the edge of the paper.
Leave the box for a while and move onto the dividers (all will be revealed as to why, don’t worry!).
Using the thick card board create a template for your dividers. I drew a rectangle that was the same height as my tallest card and 5-8 mm narrower than my box interior (make sure you measure the interior with a flexible measuring tape!).
I then worked out the width measurement of my card and divided it by six. This was the size of my “tabs”.
I found something that was the right size and shape that I wanted for my tab and drew around it (in my case it was a Two Pence Piece). I cut out this shape separate from my rectangle template.
I used masking tape to tape the “Tab” to the template in the correct place. I needed four of each position so I drew around the template, fitting as many onto the sheet of wrapping paper as possible, in my case six per sheet.
WARNING: Make sure that you do the correct number of each “Tab” position. If you decide to reverse the pattern on alternate dividers like I did you need to keep track of this too. I found the easiest way was to put them into the box in the correct order as I did them then I had an easy visual reminder!
Put aside the left over strips from each piece of wrapping paper – we will use these to line the box!
Print out your sticker for dividers. I used A4 sheets of self-adhesive office labels (the whole sheet is one big label!) and cut them into the shape I wanted.
Stick the labels onto the dividers – again, I did this whilst keeping the label pile and the divider pile in the correct order so that I got the right one in the right place!
Use a laminating machine to laminate each divider. If you are lucky you can get more than one in a plastic pocket to save money. If you don’t have a laminator many copy shops offer this service at reasonable prices.
Cut out each divider using scissors. Cut about 2-3 mm out from the edge of the paper inside (this was why we made the divider smaller than the box interior). Check they fit and trim a little more if necessary.
Print out your “Event Grids” and glue one to the front of each month’s divider. Keep them fairly high so they can be seen easily as you flick through the box.
Using my measuring tape I decided that the lining had to be 16 cm tall to cover the edges folded over at the top and cut my strip of left over wrapping paper to that height.
Instead of measuring I bent the strip of leftover wrapping paper gently into the box and pressed in a fold once I had the entire side covered. I then did the same thing for the adjacent side. One strip of paper covered the inside of two sides nicely but no more so I cut it to precisely that length.
Repeat step seventeen for the other two interior walls!
Write the birthdays and anniversaries of your nearest and dearest on the grids and enjoy! If I buy a card for a specific occasion I stick a post-it note on the front with who it is for so I don’t get to the posting date and forget (yes, I do this quite regularly, which is why we have spare Mother’s and Father’s Day cards!).
I’m just wondering if I should cover the box with transparent sticky backed plastic to protect it from muck. What do you think?
In a bid to get some more opinions this week I am linking to; Handmade Monday, It’s Overflowing!, “Work it Wednesday” at the Turquoise Home, Fabulously Creative Friday at Jennifer Rizzo and Remodelaholic.